Rectangular Hollow Sections GOST 30245Steel bent closed welded
square and rectangular section for building
Application:for steel Building Structures.
Manufacture method:Shaping the round tubular section with
longitudinal weld(Automatic high frequency welding) and consequent
spellerizing to square or rectangular section.
The article sections shall conform to those specified in fingures 1
Remark: h—Height(width)；b—width；t—wall thickness；R—edge radius；I—Inertia
moment；W—resistance moment；i—radius of inertia
- The maximum deviation of the wall thickness shall conform to the
maximum deviation of thickness of the blank metal with a width of
1250mm of normal rolling accuracy E in accordance with GOST
19903.Maximum deviations of thickness shall not apply to the places
- The maximum deviation of the section height and width shall not
--+/-1.5mm for a section height (width)of up to 100mm
--+/-2.0mm for a section height(width)exceeding 100mm.
In case of a section with a height (width)of 100 mm and a wall
thickness of 7mm,The maximum deviation of the section height (width
) shall not exceed +/-2.0mm
3.The deviation of an angle in a cross-section from 90 °shall not
exceed +/-1°30’,In case of sections with a wall thickness from 7 to
14mm,The maximum deviation from 90° shall not exceed +/-2°